75
STAT — You attempted to calculate 1-var or 2-var stats with
no defined data points, or attempted to calculate 2-var stats
when the data lists are not of equal length.
SYNTAX — The command contains a syntax error: entering
more than 23 pending operations or 8 pending values; or
having misplaced functions, arguments, parentheses, or
commas. If using P, try using W and the appropriate
parentheses.
TOL NOT MET — You requested a tolerance to which the
algorithm cannot return an accurate result.
TOO COMPLEX — If you use too many levels of MathPrint™
complexity in a calculation, the TOO COMPLEX error is
displayed (this error is not referring to complex numbers).
LOW BATTERY — Replace the battery.
Note: This message displays briefly and then disappears.
Pressing - does not clear this message.
To Next Page
Loading...
