FUNCTION PARAMETRIC POLAR SEQ
Graphing modes define the graphing parameters.
FUNCTION graphing mode plots functions, where Y is a function of X.
PARAMETRIC graphing mode plots relations, where X and Y are functions of T.
POLAR graphing mode plots functions, where r is a function of q.
SEQUENCE graphing mode plots sequences.Three sequences are available:
u, v, and w as functions of n.
THICK DOT-THICK THIN DOT-THIN
Line Style: Graphs as:
THICK
Thick line style (default). More pixels displayed around a
plotted point (pixel).
DOT-THICK
Large dot plotting. (3x3 pixels) Equivalent to DOT on earlier
TI-84 Plus family calculators.
THIN
Thin line style (graphing per pixel).
DOT-THIN
DOT display is 1 pixel per dot graphed.
Note: You can change individual line styles in the Y=editor.
THICK plotting mode resets all Y= line styles to a thick line connecting each
point calculated for the selected functions.
Note: The THICK plotting mode on the TI-84 Plus CE is equivalent to the
CONNECTED plotting mode on the TI-84 Plus family of graphing calculators.
DOT-THICK plotting mode resets all Y= line styles to a large dot and plots only
the calculated points of the selected functions.
Note: The DOT-THICK plotting mode on the TI-84 Plus CE is equivalent to the
DOT plotting mode on the TI-84 Plus family of graphing calculators.
THIN plotting mode resets all Y= line styles to a thin line connecting each point
calculated for the selected functions.
Note: Use THIN plotting mode for function graphing when looking at any
functions which asymptote to an axis.
DOT-THIN plotting mode resets all Y= line styles to a small dot and plots only
the calculated points of the selected functions.
Keyboard Basics 21
To Next Page
Loading...
Need help?
General
