Texas Instruments TI-Nspire Getting Started

Shown
on
Message and Description
Sending
handheld
“<folder>/<filename> transferred as <folder>/<filename
(#).“
This message is displayed at the end of a successful transfer
when the file had to be renamed because a file already exists
on the receiving handheld with the original name. The
transmitted file is renamed by appending a number to the end
of the name. Rename numbering always begins with (2) and
can increment by one, as needed.
Sending
handheld
“<folder>/<filename> transferred as <folder>/<new
filename>.“
This message indicates that a new folder was created on the
receiving handheld to contain the transmitted document.
Receiving
handheld
“<folder>/<filename(x)> received.“
This message indicates that the receiving handheld has a
document with the same name as the document being sent.
Receiving
handheld
“<new folder>/<new filename> received.“
This message indicates that a new folder has been created to
contain the transmitted document.
Receiving
handheld
“Transfer failed. Check cable and try again.“
OK
This message indicates that the cable is not correctly attached
to the receiving handheld’s link port. Remove the cable then
reattach it and try the transmission again.
Click OK to cancel the transmission message.
Connecting Handhelds and Transferring Files 107

Texas Instruments TI-Nspire Specifications

General

Type	Display
Form factor	Pocket
Product color	Blue, White
Display resolution	320 x 240 pixels
Display size (HxV) (imperial)	0 \
Compatible operating systems	Windows Vista/XP Mac OS X 10.4/10.5
Battery type	AAA
Number of batteries supported	4

Weight and Dimensions

Dimensions (WxDxH)	100 x 198.3 x 28.7 mm