3
August ’01 Preface
About This Guide
This manual describes the TIRIS 3D-Analog Front End integrated circuit (TMS37122), it de-
scribes the functions and parameters of the 3D-Analog Front End. This circuit enables expan-
sion of a current Remote Keyless Entry system to Keyless Entry function. It provides the
information that you will need in order to use the integrated circuit in your RFID system. It
is generally targeted at security system suppliers designing hardware and software for car
manufacturers.
Conventions
If You Need Assistance
Application Centers are located in Europe, North and South America, the Far East and Aus-
tralia to provide direct support. For more information, please contact your nearest TIRIS
Sales and Application Center. The contact addresses can be found on our home page:
http://www.ti-rfid.com
WARNING:
A WARNING IS USED WHERE CARE MUST BE TAKEN, OR A CERTAIN
PROCEDURE
MUST BE FOLLOWED IN ORDER TO PREVENT INJURY
OR
HARM TO YOUR HEALTH.
CAUTION:
This indicates information on conditions which must be met, or a
procedure which must be followed, which if not heeded could
cause permanent damage to the equipment or software.
Note:
Indicates conditions which must be met, or procedures which must be fol-
lowed, to ensure proper functioning of the equipment or software.
Information:
Indicates information which makes usage of the equipment or software eas-
ier
To Next Page
Loading...
