Texecom Premier 8SP - Change User Code; View Log (LCD Only); Abort Communications

User Functions Menu Premier 8SP Master User Manual
12 INS237
Change User Code
All users of the alarm system can change their own Access
code number.
" To change your Access code, proceed as follows:
YES to Arm?
MENU for Options
Enter new code
If the code is 4 or 5 digits the / key to
accept.
????
aypress
Enter N5
Enter Access code ????
Armed
Zones
87654321
Ready
Alarm
Service
1
2
3
Armed
Zones
87654321
Ready
Alarm
Service
4
5
The keypad will sound an acceptance tone if the new
Access code was accepted. If you hear an error tone
(low), please repeat from step 1.
Armed
Zones
87654321
Ready
Alarm
Service
Re-enter new code ????
Please Enter New
Code : ******
Please Enter New
Code : ****
View Log (LCD Only)
The control panel has a 500 Event Log, which stores all
system activity i.e., users entering their codes to arm and
disarm the system, alarm events, faults etc. Each event is
time and date stamped.
" To view the Event Log, proceed as follows:
Master Bedroom
13:15.56 28/04
Day/Month
Event Type
(showing Zone Text)
Time
Event Type
(Alarm Type & Zone No)
Inter. 05 Alm
13:15.56 28/04
Press to toggle
information displayed
A
YES to Arm?
MENU for Options
Enter N6
Enter Access code ????
1
2
3
4
Press to scroll up and down through the log.
Press to when finished.
U
N
Day/MonthTime
Abort Communications
This option aborts any communications to the Alarm
Receiving Centre.
" To Abort Communications, proceed as follows:
The keypad will bleep and the alarm system will abort
all communications to the Alarm Receiving Centre.
Enter N7
Enter Access code ????
Armed
Zones
87654321
Ready
Alarm
Service
1
2
3
Premier 8SP
17:30.21 28/04
Armed
Zones
87654321
Ready
Alarm
Service
YES to Arm?
MENU for Options