Premier 8SP Master User Manual About the Alarm System
INS237 5
Function Keys
The remote keypad function keys are described as follows:
Key Function
+,
The Bypass key is used for either group or manual
bypass of zones (see page 8).
-,
The Menu key is used to access the more advanced
user functions and programming options.
., The Arm key is used when away arming the system.
/, The Stay key is used when Stay arming the system.
0,
The Area key is when viewing the log on the LCD
remote keypad.
1,
The Chime key is used to enable/disable the chime
feature, see page 11.
2,
The Reset key is used to reset the system after an
alarm or service fault condition, see page 10.
3,
The Yes key is used to arm the system and to select
menu options.
4,
The No key is used when editing text on the LCD
remote keypad.
"
When a keypad is in use other keypads will be locked-
out except for emergency functions. The lock-out will
persist 4 seconds after the last key is pressed.
Information tones will be limited to the keypad in use.
Emergency Keys
In case of emergency, the alarm system can provide three
immediate emergency alarms by pressing and holding two
specific keys for three seconds.0
Emergency Alarm Press Keys
# & %
( & )
* & '
"
The emergency keys can be individually enabled or
disabled for each keypad on your alarm system by
the installer.
The Panic alarm can be individually programmed for
either audible or silent operation for each keypad.
Emergency commands are detailed on the inside flap
label of each remote keypad.
To Next Page
Loading...
Need help?
General
