Operating the Alarm System Premier 8SP Master User Manual
8 INS237
Bypassing Zones
Manually Bypassing Zones
Bypassing a zone prevents it from causing an alarm.
"
After manually bypassing a zone, the bypass will
remain in place until the zone is manually
unbypassed.
The bypass mode will time-out if no key is pressed for
60 seconds.
24 hour zones cannot be unbypassed if they are
violated.
" To manually bypass zones, proceed as follows:
Bypass Zone> 00
*NONE BYPASSED*
Armed
Zones
87654321
Ready
Alarm
Service
YES to Arm?
MENU for Options
The light will flash quickly.Ready
Enter the zone number ,
e.g. Enter to select Zone 2.
??
02
Press B
Enter Access code ????
Armed
Zones
87654321
Ready
Alarm
Service
1
2
3
Bypass Zone> 02
Zone 02 Bypassed
The selected zone is now bypassed. Repeat step 3 to
bypass additional zones.
Armed
Zones
87654321
Ready
Alarm
Service
4
5
Once the selected zones have been bypassed press:
/ to Away arm
to Stay arm
to return to the normal disarmed state
ya
s
N
"
If the Quick Keys feature is enabled you can omit step
1 from the above procedure.
When one or more zones are bypassed the Ready
light will flash. If the system is fitted with a Premier
RKP8/16 Plus or LCD remote keypad then the Bypass
light will also illuminate.
Unbypassing Zones
To manually unbypass zones, perform the manual bypass
procedure on a zone that is already bypassed.
• 24 hour zones cannot be unbypassed if they are still
violated.
• If your installer has enabled the “Reinstate Bypassed
Zones on Disarm” option all zones will automatically be
unbypassed each time the system is disarmed.
Group Bypass
The Group Bypass feature allows you to Bypass a
predefined group of zones. The alarm system has up to four
groups.
" To Bypass a group of zones, proceed as follows:
Bypass Zone> 00
Zone 03 Bypassed
YES to Arm?
MENU for Options
The keypad will display the bypassed zones.
If required, zones can be added or removed from the
group by entering the required zone number ,
e.g. Enter to add Zone 5.
??
05
Enter bypass group 14- followed by B
Enter Access code ????
Armed
Zones
87654321
Ready
Alarm
Service
1
2
3
Bypass Zone> 05
Zone 03 Bypassed
The selected zone is now bypassed. Repeat step 3 to
bypass additional zones.
Armed
Zones
87654321
Ready
Alarm
Service
4
5
Once the selected zones have been bypassed press:
/ to Away arm
to Stay arm
to return to the normal disarmed state
ya
s
N
Bypass Zone> 00
Zone 04 Bypassed
Bypass Zone> 05
Zone 04 Bypassed
Bypass Zone> 05
Zone 05 Bypassed
Armed
Zones
87654321
Ready
Alarm
Service
"
If the Quick Keys feature is enabled you can omit step
1 from the above procedure.
When one or more zones are bypassed the Ready
light will flash. If the system is fitted with a Premier
RKP8/16 Plus or LCD remote keypad then the Bypass
light will also illuminate.
To Next Page
Loading...
Need help?
General
