Premier 8SP Master User Manual System Program Menus
INS237 13
4. System Program Menus
The Master User and Users with the relevant access level
can access the System Program Menus. These menus allow
the users access to the more advanced features and
functions of the alarm system.
The following programming menus are available:
Menu Function Page
Programming Users
!", Program User 15
!#, User Type 15
!$, User Options 16
!%, User Text 16
!(, Reserved -
!&, Program Manager Users 16
System Tests and Utilities
'", Walk Test 18
'#, Test Speakers and Outputs 18
'$, Send Test Call 18
'%, Enable Remote/Engineer Access 18
'(, Start Call Back 18
'&, Program Time 18
'), Program Date 18
'*, Program Banner Text 18
'!, Print 100 Events 18
'', Exit Program Mode 18
"
Menus !" - !% are restricted to Access
codes enabled for Code Programming (Master
Users).
Menus '" - ') are restricted to Access
codes enabled for User Programming.
To abort programming at any stage and preserve the
original settings, press -.
The alarm system will automatically exit program
mode if no key is pressed for 60 seconds.
To access the programming menu, enter your Access
code
5555 and press - followed by ':
Programming Menu
Enter Code > ??
Armed
Zones
87654321
Ready
Alarm
Service
Enter Access code
Then press then
????
N9
All Zone lights lit and
light flashesReady
Enter menu command
??
A programming menu is selected by entering a two-digit
menu code. On completion of each menu option, the
system reverts to the main programming menu, allowing
other programming menu options to be accessed.
To exit the programming menu enter
'', the system
will revert to normal operation:
Programming Menu
Enter Code > ??
Armed
Zones
87654321
Ready
Alarm
Service
All Zone lights lit and
Ready light flashes
To exit programming mode,
enter
99
Premier 8SP
12:45.59 28/04
Armed
Zones
87654321
Ready
Alarm
Service
All zones clear and
light on.Ready
LCD shows banner text
and time/date.
Programming Text (LCD Only)
Text is programmed in a similar way to mobile phones.
Characters are selected by pressing the corresponding key
the appropriate number of times (to select a character on
the same key, press 6 to move the cursor along).
The table below shows the keys to use and the characters
that are assigned to them:
Key Characters
!
. , ? ! 1 @ “ - &
#
a b c 2 A B C
$
d e f 3 D E F
%
g h i 4 G H I
&
j k l 5 J K L
'
m n o 6 M N O
(
p q r s 7 P Q R S
)
t u v 8 T U V
*
w x y z 9 W X Y Z
+
_ 0 , # * Custom characters
,
Move cursor left and right
-
Backspace (delete)
.
Accept text
To Next Page
Loading...
