Premier Elite Ricochet Kits Quick Guide
INS626 19
Engineer Utils
View System Log
to view System, Alarm or Mandatory log
System log
Alarm Log
Mandatory Log
Use to move up and down through log (down moves back in time, up moves forward again),
to show area
information or time and date,
- or to find specific events
Move backwards and forwards
View Omits/Reinstate Events
View Area/Time and date
View Maintenance Events
View Priority Alarms
View Tamper Alarms
View Matching Events
Do Bell Test
Use to select an option, use
or to activate outputs
1: Test Bell 6: Test RedCARE
2: Test Strobe 7: Fast
3: Test Speaker 8: LCD Display
4: Test Digi 9: User Outputs
5: Test Panel
Do Walk Test
Press
to display zones that have been tested/still need testing, to make zones Chime every time they are
activated.
View Zone Status
Use
- to enter zone number or use to search, to walk test selected zone, to omit zone
temporarily
System Tests
to select an option or use
Test Outputs (see Do Bell Test)
View Batt Status
View Version No.
Confirm Devices
Use
to select network, to confirm Devices, to view error count, to reset error count
Check RKP Status
Use
- to select keypad, to select network, to display errors/tamper, to test output, to
test sounder,
Check Exp. Status
Use - to select expander, to select network, to display zones/voltage/outputs/errors, to
test zones,
to test sounder,
to enter time (24-hour format)
to accept
Set System Date
Use
to accept
Location Text
Press to view Location Text
Print Log
to enter number of events to be printed,
Start Soak Test
Use
- to select an area, ( = all areas, = areas A – H and I –P), to accept, to start test
Change Eng.Code
Use
- to enter a code, to accept
Adjust Volumes
Use
to select Panel, Keypad or Expander speakers. Press to edit, - to enter a value, to
accept
Default NVM Data
Press
to select an option or to search, to default
00: Panel Outputs 09: Remote Options
01: Digi Outputs 10: User Codes
02: Expander Outputs 11: System Timers
03: Keypad Outputs 12: System Options
04: Com???? Channels 13: Area Options
05: RedCARE Pins 14: System Text
06: Zone Types 15: UDL Options
07: Zone Text 16: Digi Options
08: Expander Options
View iD Data
Use
to select loop, to select normal scan, quick scan or biscuit mapping. Use to select biscuit,
to edit,
- to enter zone number, to accept
Configure Radio
Use
- to select a device, to learn device, to map zone, - to enter zone number,
accept
Ricochet Diagnostics
Use
- to select a device, to scroll between different diagnostics screens.
To Next Page
Loading...
