Texi Integra 5 - Page 97

EN
NOTE: When using
dierent position of
needles, please
choose
corresponding
threading method.
If you use needle D
or needle A, please
thread according
to the threading
path. See
picture.
If used the needle
A, follow the 9-11
steps. If used the
needle D, follow the
step 9 and step 11.
Pull about 10cm of
thread through the
right needle hole
and put it under the
presser foot.
thread the
needle D
needle D
thread the
needle A
needle A
Texi Integra 5 97