EN
THREADING THE CHAIN STITCH/COVER STITCH LOOPER THREAD
THREADING THE RIGHT NEEDLE
Note: Please use the tweezers in accessories box to help threading.
Note: With the help of pincet in accessory
box to help threading.
Turn the hand wheel toward you until the chain stitch/cover
stitch looper reached the rightmost position. According to color
threading diagram, follow the 1-12 steps.
According to color threading diagram, follow
the 4-11steps. The thread from front to back into
the chain stitch/cover stitch looper hole (12), Pull
about 10cm of thread through the chain stitch/
cover stitch looper hole and put it under the
presser foot.
Follow the 1-10 steps.
Texi Integra 596
To Next Page
Loading...
