TRANSAXLE DISASSEMBLY
Page A-2
Dana Electric Transaxle Shop Rebuild and Parts Manual
2. Remove ten bolts from differential cover plate.
(Ref Fig. A-3 on page A-2) (Ref Fig. A-4 on page
A-2)
Fig. A-3 Differential Cover Plate, Assembled
Fig. A-4 Removing Bolts from Differential Cover
Plate
3. Carefully insert a rigid gasket scraper between the
cover plate and the differential housing. Pry gently
and remove differential cover plate. Use caution
when prying to avoid bending cover plate.
(Ref
Fig. A-5 on page A-2) (Ref Fig. A-6 on page A-2)
Fig. A-5 Removing Differential Cover Plate
Fig. A-6 Bolts and Differential Cover Plate Removed
To Next Page
Loading...
