©Copyright Task Force Tips LLC 2002-2021 5 LIN-030 May 21, 2021 Rev18
3.0 GENERAL INFORMATION
The Task Force Tips Ultimatic, Mid-Matic, and Handline nozzles are designed to provide excellent performance under most fire fighting
conditions. Their rugged construction is compatible with the use of fresh water as well as fire fighting foam solutions.
3.1 VARIOUS MODELS AND TERMS
Ultimatic, Mid-Matic, and Handline nozzles are available in several models. Some common models are shown below:
Figure 3.1
SERIES FLOW RANGE NOMINAL PRESSURE STANDARD COUPLING*
GPM L/min PSI BAR
ULTIMATIC
ULTIMATIC and IMPULSE
TRIGGER VALVE SYSTEM
10-125 40-500 100 7 1, 1-1/2 NH or 1-1/2 NPSH
10-100 40-400 75 5 1, 1-1/2 NH or 1-1/2 NPSH
MID-MATIC
MID-MATIC and IMPULSE
TRIGGER VALVE SYSTEM
70-200 260-760 100 7 1-1/2 NH
70-200 260-680 75 5 1-1/2 NH
70-180 260-680 55 3 1-1/2 NH
HANDLINE 95-300 360-1140 100 7 1-1/2 or 2-1/2 NH
95-250 360-950 75 5 1-1/2 or 2-1/2 NH
95-225 360-850 55 3 1-1/2 or 2-1/2 NH
* Other threads, coupling sizes. or connector styles can be specified at time of order.
NOZZLE WITH VALVE
and INTEGRAL PISTOL GRIP
TIP ONLY NOZZLE
COUPLING
RUBBER
GASKET
PISTOL
GRIP
STREAM
SHAPER
ON
F
L
O
W
C
O
N
T
R
O
L
OFF
BARREL LABEL
NAME LABEL
VALPARAISO IN 46383-6040 +1.219.462.6161 800.348.2686
VALVE HANDLE
NOZZLE WITH VALVE TIP ONLY NOZZLE
WITH TWIST SHUTOFF
VALVE POSITION
LABEL
GASKET
GRABBER
INLET
SCREEN
DETENTS
VALVE RING
NOZZLE WITH IMPULSE TRIGGER VALVE SYSTEM
OFFON
TRIGGER
4 POSITION LOCK
To Next Page
Loading...
