118
Installation and Maintenance
Service Manual
Step Procedure
13. Remove electronic expansion valve assy
Unsolder the welding joints connecting electronic
expansion valve assy then remove the electronic
expansion valve assy and 4-way valve.
Note:
Before unsoldering the welding joint, wrap the 4-way
valve with a wet cloth completely to avoid damage to
the valve caused by high temperature.
14. Remove left side plate
Remove connection screws connecting the left side
plate. Then remove the right side plate.
15. Remove condenser sub-assy
Remove the screws fixing the Remove condenser
subassy
and then remove the Remove condenser subassy.
electronic expansion
valve assy
welding joints
Electric Expansion
Valve Fitting
condenser
sub-assy
left side plate
11. Removal Procedure
To Next Page
Loading...
