Need help?Do you have a question about the Tharo Systems H-435+ and is the answer not in the manual?
Provides instructions for loading label stock into the printer.
Provides step-by-step instructions for loading the ribbon.
Explains how to connect the printer to a computer via USB and power.
Guides through the installation process for the EASYLABEL software.
Details how to install the printer driver for Windows 8/10 and alternative methods.
Explains how the printer calibrates label height and prints a self-test label.
Lists printer error types, beep patterns, descriptions, and solutions.
Explains the printer's USB host capabilities and firmware updates via USB.
Lists common printer problems and their corresponding solutions.
General| Print Resolution | 300 dpi |
|---|---|
| Print Technology | Thermal Transfer |
| Maximum Print Width | 4.25 inches |
| Connectivity | USB, Serial |
| Memory | 16 MB Flash |
| Label Length Range | 0.25 inches |
| Supported Barcode Types | Code 39, Code 128, UPC/EAN, Codabar, Interleaved 2 of 5, Postnet, PDF417, Data Matrix, QR Code |
| Supported Media Types | Thermal Transfer |
| Power Requirements | 100-240V AC, 50/60Hz |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Print Speed | Up to 6 IPS (152 mm/sec) |
| Media Types | Labels, tags |
| Barcodes | Supported |
| Humidity | 25-85% non-condensing |
To Next Page
