Thermo Orion Aplus Series - Appendix D Meter Default

Orion Benchtop pH/ISE Meter Instruction Manual
Meter Default
115
Appendix D
Meter Default
pH electrode slope 100.0%
pH isopotential point 7.000
pH resolution .001
temperature 25.0
o
C
ready on
hold off
beep on
autoshutoff on
timer interval 5 seconds
print mode 1-manual print
print interval 1 minute
datalog mode 0-off (520Aplus, 525Aplus, 710Aplus,
720Aplus, and 920Aplus)
measurement channel Channel 1 (525Aplus, 720Aplus and 920Aplus)
electrode ID pH (920Aplus)
high alarm limit off (520Aplus, 525Aplus, 710Aplus, 720Aplus
and 920Aplus)
low alarm limit off (520Aplus, 525Aplus, 710Aplus, 720Aplus
and 920Aplus)