Thermo Orion Aplus Series - Chapter IV Rear Panel and Electrode Connections; Instrument Set Up

Orion Benchtop pH/ISE Meter Instruction Manual
Rear Panel and Electrode Connections
12
Instrument Set Up
The meter can be adjusted to provide you an optimal viewing angle via the
flip stand. To adjust the viewing angle, turn the instrument over and place
your thumbs on the inside of the stand sides. As you lift the stand, gently
push the sides of the stand out. This will lock the stand at a 90˚ angle,
providing easy viewing from across the lab. To adjust to the last viewing
angle, continue to gently push the sides of the stand out as you lift the stand
to its furthest point.