Orion Benchtop pH/ISE Meter Instruction Manual
Other Measurement Modes
48
Chapter VIII
Other Measurement Models
A. Temperature Measurement
The meters display temperature in the range -5.0 to +105˚C simultaneously
with sample results. Whenever an ATC probe is connected, live temperature
measurements are displayed in the prompt line. For results greater than
100˚C the tenth digit is deleted. On the Orion 920Aplus Meter the
temperature appears after the channel designation and electrode ID.
Example: 1-pH 25.0˚C RDY.
For Temperature Compensation see pH Calibration.
To Next Page
Loading...
