Orion Benchtop pH/ISE Meter Instruction Manual
Introduction
1
Chapter I
Introduction
Thermo Electron Corporation provides pH and ISE meters for every
application from pH measurements to advanced Ion Selective Electrode
work. This manual describes the operation and use of the Orion 410Aplus
pH/Temperature Meter, Orion 420Aplus pH/mV/Temperature Meter, the
Orion 520Aplus Advanced pH/mV/Temperature Meter, the Orion 525Aplus
Dual Channel pH/mV/Temperature Meter, the Orion 710Aplus pH/ISE
Meter, the Orion 720Aplus Dual Channel pH/ISE Meter, and the Orion
920Aplus Advanced pH/ISE Meter.
All meters are microprocessor-controlled and feature pH autocalibration,
sealed keypads, simultaneous temperature display and many other features.
The Orion 410Aplus, 420Aplus and 710Aplus feature a custom LCD
display. The Orion 520Aplus, 525Aplus, 720Aplus, and 920Aplus feature a
two color vacuum fluorescent display with a separate prompt line that
explains each step during calibration and measurement.
How to Use This Manual
For more detail on the operation of any of the models, please refer to the
Table of Contents for the page location of an operation of a particular meter
model. Troubleshooting instructions are common to all meters and this
information is located toward the end of this manual.
Explanation of key functions and additional reference information are not
required for calibration and measurement can be found in the appendices.
To Next Page
Loading...
Need help?
General
