6.3.7 Filling of spiral dispenser
Filling of spiral dispenser with pellet is done when pellet is loading for the first
time or in the case of empty silo. Process of filling of spiral dispenser is set to 90
seconds .
Filling of spiral dispenser is done by pressing of button SET, and after by
pressing buttons 5 or 6 we choose MENU 06-FILLING OF SPIRAL.
Filling os spiral is activated by pressing of button SET.
Prior to start up of the stove, check combustion chamber. There is a
big possibilty that there are some leftovers from pellet in it while
spiral dispenser was filled. Combustion chamber needs to be empty
and then ignition process can be initiated.
6.3.8 STATE OF THE STOVE
State of the stove is only of informational character and its purpose is to give
us information about condition of the stove. On display information is randomly
changed about water temperature in the stove, flue gasess temperature, fan
RPM, etc.
To enter this option press SET, after that with buttons 5 or 6 we choose MENU
07 ā STATE STOVE.
6.3.9 Technical settings
TECHNICAL SETTINGS are foreseen for authorised personnel only.
6.3.10 FUEL TYPE
FUEL TYPE is not using on the Interio stoves
To Next Page
Loading...