If temperature rises above set temperature by 2 °C, stove will be shut down
automatically and on display will be written WAIT COOLING.
When temperature in the stove decreases for 2 °C below set temp. regulation will start
process of ignition again.
7.6 Cleaning of FIRE-POT
During its work stove has set timer for cleaning of combustion basket (fire-pot)
after certain time. This phase is shown on display and work of the stove is set to
lower power,and suction fan is working on maximun for certain period of time as
set in the factory.
When cleaning phase is finished, stove will continue to work and power will be
set on power choosen before.
To Next Page
Loading...