After ignition of pellet, and after tempereture of flue gasses raise on value of 55
°C, regulation receives signal that fire is on and stove continues to work with set
values.
7.2 Shutting down of stove
Press and hold button 4 for 3 (three) seconds. On display it is written
CLEANING FINAL. Suction fan is working on maximum, feeding of pellet is
stopped.
7.3 Stove power adjustments
During working phase, it is neccesary to set working power in which we
want stove to work.
Adjustments of the working power is possible in the range from 1-5, and
selection of desired power is done by buttons 5 or 6 (*1). On upper line it
is writen WORK and set power (*2), and present working power sign is
blinking on lower line on the right side (*3).
Power 1 is lowest and power 5 is highest power.
To Next Page
Loading...