EasyManua.ls Logo

Thermowave TL2000 - Disassembly and Disposal; Disassembly; Disposal

Default Icon
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA EN 12.2019 Modification 02 from 01.12.19. Copies are not subject to the change service. 40 of 41
10 Disassembly and disposal
10.1 Disassembly
Risk of injury
The disassembly of the PHE gives rise to a risk of injury.
Be mindful of the following points:
➢ The PHE must be inoperative.
➢ Empty the PHE, and ensure that the mediums are collected securely.
➢ Ensure that the PHE is at the ambient pressure and ambient temperature before work is begun.
➢ If dangerous mediums (corrosive, poisonous, combustible, explosive etc.) are used, there is an acute risk
of injury to all the people in the surrounding area. Ensure that the regulations for the mediums are
followed.
➢ Always wear suitable protective equipment (PPE).
➢ If hot or very cold mediums are used, there is a risk of burning or freezing.
10.2 Disposal
The PHE must be sent to final recycling at the end of its service life in accordance with the local disposal
guidelines.
If requested, thermowave shall dispose of your PHE. The PHE shall be disassembled, transported away and
disposed of in a technically correct manner; our employees shall provide these services for a fee.

Table of Contents