Page 21
Q-Series KMASS Module Product Manual, Rev. E, March 2020 thinklogical®
Electromagnetic Immunity
EN 55024:2011+A1
CENELEC EN 55032:2015
EN 61000-3-2:2000 Harmonics
EN 61000-3-3:2008 Flicker
EN 61000-4-2:2009 Electro-Static Discharge Test
EN 61000-4-3:2006 A1:2008, A2:2010 Radiated Immunity Field Test
EN 61000-4-4:2004 Electrical Fast Transient Test
EN 61000-4-5:2006 Power Supply Surge Test
EN 61000-4-6:2009 Conducted Immunity Test
EN 61000-4-11:2004 Voltage Dips & Interrupts Test
Supplementary Information
The following statements may be appropriate for certain geographical regions and might not apply to
your location:
• This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations. Cet appareil num
rial brouilleur du Canada.
• This is a Class A product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take corrective action.
• This equipment has been tested and found compliant with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications in
which case the user may be required to make adequate corrective measures at their own expense.
• This Class A digital apparatus complies with Canadian ICES-003 and has been verified as
compliant within the Class A limits of the FCC Radio Frequency Device Rules (FCC Title 47, Part
15, Subpart B CLASS A), measured to CISPR 22:1993 limits and methods of measurement of
Radio Disturbance Characteristics of Information Technology Equipment.
•
The user may notice degraded audio performance in the presence of electro-magnetic fields
.
Product Serial Number
Thinklogical products have a unique serial number, which includes a date-code, printed on an
adhesive label that is affixed to the unit. The format for the date-code is 2 digits for the month,
dash, 2 digits for the year, plus at least four digits for a unique unit number. For example:
11-190425 indicates the unit was built in the 11
th
month of 2019 and is unit number 425.
Connection to the Product
Connections and installation hardware for our products use industry-standard devices
and methods. All wiring connections to the customer equipment are designed to minimize
proprietary or customized connectors and cabling. Power connections are made with
regionally appropriate power cords and approved methods.
To Next Page
Loading...
Need help?
General
