4. Operation
ARV-310 4-14
2. Setting Procedure for Rotating/Revolving Motion
When performing mixing and de-aerating only by
rotating/revolving motion without performing vacuum
decompression, set the mixing recipes in the following
procedure.
1) Press the SPEED button.
・ The brightness of the SPEED indicator changes and then
you can set the revolution speed.
2) Press the UP or DOWN button to display the revolution
speed to set on the SPEED indicator.
3) Press the SPEED button.
・ The revolution speed is set.
4) Press the VACUUM button.
・ The brightness of the VACUUM indicator changes and
then you can set the vacuum decompression pressure
value.
5) Press the VACUUM OFF button.
・ The VACUUM indicator lights out and then setting the
vacuum decompression pressure value becomes
impossible.
To Next Page
Loading...