Use the rotary control [DATA CONTROL] to select the desired main MIDI send channel.
The display shows the current value e.g. .
The MIDI channels for the split and layer voices are used relative to the main
MIDI send channel as follows
Send channel for split voice = main MIDI send channel + 1
Send channel for layer voice = main MIDI send channel + 2
With some advanced MIDI editing functions, the input of numeric values is required.
These include:
n Program change
n Bank LSB
n Bank MSB
n Data control assign.
Use the piano keys shown below for entering numerical values. Alternatively, you can
set the desired numerical value using the rotary control [DATA CONTROL].
When inputting data in edit mode, it will be sent as a MIDI command to the digital
piano, once you press the enter key.
After pressing the enter key the digital piano returns to normal play mode.
When pressing the cancel key in edit mode, this mode will be quit and the digital
piano returns to normal play mode. All settings remain unchanged.
Piano keys for numeric date input (G5,
A5, B5, C6, D6, E6, F6, G6, A6, B6)
Input key C7
Cancel key B
b
6
MIDI functions
digital piano
32
To Next Page
Loading...
Need help?
General
