The digital piano returns to the normal play mode and the assignment of the rotary
control [DATA CONTROL] has so been changed, that every time you turn the knob, a
MIDI program change will be sent. The display shows the current MIDI program
number (0 - 127), e.g. .
Please note the difference to button F
#
5, that you use to enter a single MIDI
program number.
There are two ways to send bank LSB (Least Significant Byte) changes. You can either
send a single specific LSB (rotary control knob assignment remains unchanged), or
you can assign the data control to the rotary control, so that bank LSB changes are
sent. Please note, that after any kind of bank LSB changes usually a MIDI program
change message has to be sent in order to execute a sound change on the receiving
device.
n Sending a single specific bank LSB (rotary control knob assignment remains
unchanged)
Press the [FUNCTION] button, to enter edit mode.
Press the piano key A
b
5.
Enter the bank LSB value you want to send using the keys for numeric input.
As an alternative to entering via the function keys for numeric inputs, you
can select the bank LSB value in this step also using the rotary control
[DATA CONTROL].
Press the input key C7 to send the MIDI command.
n Sending bank LSB changes using the rotary control [DATA CONTROL]
Sending bank LSB changes
MIDI functions
digital piano
36
To Next Page
Loading...
Need help?
General
