5.
Use the two screws 4 ´ 15 (13) and the seals (14) to attach the speaker boxes.
Connect the speaker cable (4) and pedal cable (5) according to the labels.
Move the digital piano to its designated location.
1. Make sure that the device is turned off before you connect it to the power
supply or disconnect it.
2. Turn the volume knob counter-clockwise to minimum before connecting the
digital piano to the power supply or to other devices. This is to protect the
speakers from damage.
3. Connect the cable from the power adapter outlet to the input socket [DC IN] on
the rear panel of the digital piano.
Plug the AC power cord into a properly wired mains wall outlet.
Connecting the power supply
Assembly instructions
digital piano
12
To Next Page
Loading...
