Thomas Cut 250 - Plates and Labels

24 pages

Save Page as PDF

To Next Page

To Previous Page

FluidConnectors

Parker Hannifin Corporation

Tube Fittings Division

Columbus, OH

Bulletin 4390-974250

Cut 250 Saw Use and Maintenance Manual

Plates and Labels

Main Page

Contents3
Ordering Spare Parts3
- Table of Contents3
Guarantee3
Machine Certification and Identification Marking4
Chapter 1 ______________________________________5
Chapter 2 ______________________________________5
Reference to Accident-Prevention Regulations5
- Advice for the Operator5
- Location of Shields against Accidental Contact with the Tool5
- Electrical Equipment According to European5
  - Standard "CENELEC en 60 204-1" (1992)5
- Emergencies According to European Standard5
  - Cenelec en 60 204-1" (1992)5
Recommendations and Advice for Use5
- Recommendations and Advice for Using the Machine5
CHAPTER 3 ______________________________________ Technical Characteristics6
- Minimum Requirements for the Premises Housing the Machine7
- Anchoring the Machine7
- Instructions for Electrical Connection7
- Instructions for Assembly of the Loose Parts and Accessories7
- Deactivating the Machine7
Chapter 4 ______________________________________6
Technical Characteristics6
- Table of Cutting Capacity and Technical Details6
Machine Dimensions - Transport - Installation - Dismantling6
- Machine Dimensions6
- Transport and Handling of the Machine6
Chapter 5 ______________________________________7
Machine Functional Parts7
- Operating Head7
- Vice8
- Bed8
Chapter 6 ______________________________________8
Description of the Operating Cycle8
- Starting up and Cutting Cycle8
Chapter 8 ______________________________________9
Regulating the Machine9
- Saw Head9
- Vice9
- Regulating Arm Blockage9
- Changing the Blade9
- Changing the Lubricating Coolant Pump9
Routine and Special Maintenance9
- Daily Maintenance9
- Weekly Maintenance9
- Monthly Maintenance9
- Six-Monthly Maintenance10
- Oils for Lubricating Coolant10
- Special Maintenance10
Chapter 9 ______________________________________10
Material Classification and Choice of Tool10
- Definition of Materials10
- Choosing the Blade11
- Teeth Pitch11
- Cutting and Advance Speed11
- Breaking in the Blade11
- Type of Blade11
- Table of Recommended Cutting Parameters12
- Table of Cutting Speed According to Blade Diameter13
CHAPTER 10 _____________________________________ Machine Components14
Machine Components14
- List of Spare Parts14
CHAPTER 11 _____________________________________ Wiring Diagrams17
Wiring Diagrams17
Troubleshooting19
- Blade and Cut Diagnosis19
- Electrical Components Diagnosis21
Noise Tests21
Plates and Labels22
Offer of Sale23

Thomas Cut 250 - Plates and Labels

Table of Contents

Related product manuals