Thomas NOMARK 65/99 - Tool Ø 30 mm for Template; Standard Tripod Leg Assembly

69
Tool Ø 30 mm for template
190.008
Support Tube 30mm diameter.
The support tube allows stud
welding with templates and
positioning on curved surfaces
190.009 Longer version (+ 11 mm)
=> total length : 90 mm
Tool for reducing noise ( Ø 35 mm)
190.006 Reducing noise/spatter tool
Standard tripod leg assembly
190.014
Complete kit consisting of :
1. 190.002
Tripod leg (Ø 6 x 50 mm)
2. 102.323
M5 x 4
3.
102.322
Front end cap / Legs holder
(Supplied without leg,
but with 3 screws M5 x 4)
Leg for tripod
190.002 Leg (Ø 6 x 50 mm)
Set of 3 is requested for the standard tripod
190.003 Leg (Ø 6 x 116 mm)
Set of 3 is requested for the standard tripod
Other lengths : on request
Extension kit (for studs L > 40 mm)
190.016 Extension kit
(h = 16 mm)