E-DOC-CTC-20060609-0001 v2.0
Chapter 7
Thomson Gateway Wireless Configuration
60
3 In the WPA-PSK Version list, click the desired WPA-PSK version.
4 Click Apply to immediately apply your changes.
5 Configure your wireless station(s) with the same settings.
i
Depending on the WPA-PSK version you choose, one of the following WPA-PSK encryption will
be set automatically:
> WPA: TKIP
> WPA2: AES
> WPA+WPA2: TKIP+AES
Note that AES is not yet implemented in most wireless stations.
To Next Page
Loading...
