eth Commands
342
E-DOC-CTC-20080619-0007 v1.0
eth bridge macadd
Add a static MAC address to a bridge interface.
SYNTAX:
eth bridge macadd [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|virt|WLAN}>
hwaddr = <hardware-address>
[vlan = <{default}>]
where:
brname The name of a bridge instance. OPTIONAL
intf The name of the bridge interface. REQUIRED
hwaddr The ethernet MAC address of the new entry. REQUIRED
vlan The VLAN. OPTIONAL
To Next Page
Loading...
