voice Commands
E-DOC-CTC-20080619-0007 v1.0
799
voice codec config
Configure a CODEC capability
SYNTAX:
voice codec config type = <{g711u|g711a|g722|g723_1|g726_16|
g726_24|g726_32|g726_40|g729}>
[ptime = <{10|30|20}>]
[ptime_g723 = <{30}>]
[vad = <{disabled|enabled}>]
[priority = <number{1-10}>]
[status = <{disabled|enabled}>]
where:
type The codec type REQUIRED
ptime The packet time OPTIONAL
ptime_g723 The packet time OPTIONAL
vad Enable or disable Voice Activity Detection OPTIONAL
priority The codec capability priority OPTIONAL
status Enable or disable this capability OPTIONAL