atm Commands
58
E-DOC-CTC-20080619-0007 v1.0
atm oam vclb add
Create a loopback connection for VC
SYNTAX:
atm oam vclb add port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
where:
port The ATM port number. REQUIRED
vpi The Virtual Path Identifier. REQUIRED
vci The Virtual Channel Identifier. OPTIONAL
To Next Page
