THOMSON TG784-SIP - Voice Tone Patterntable Add

voice Commands
E-DOC-CTC-20080619-0007 v1.0
889
voice tone patterntable add
Add tone pattern
SYNTAX:
voice tone patterntable add id = <number>
tone = <{off|on}>
[freq1 = <number>]
[power1 = <number>]
[freq2 = <number>]
[power2 = <number>]
[freq3 = <number>]
[power3 = <number>]
[freq4 = <number>]
[power4 = <number>]
[duration = <number>]
[nextentry = <number>]
[maxloops = <number>]
[nextentryafterloops = <number>]
where:
id ID of the tone pattern REQUIRED
tone Enable or disable this tone REQUIRED
freq1 Frequency 1 OPTIONAL
power1 Power 1 OPTIONAL
freq2 Frequency 2 OPTIONAL
power2 Power 2 OPTIONAL
freq3 Frequency 3 OPTIONAL
power3 Power 3 OPTIONAL
freq4 Frequency 4 OPTIONAL
power4 Power 4 OPTIONAL
duration Duration (ms) OPTIONAL
nextentry Next pattern entry OPTIONAL
maxloops Max loops OPTIONAL
nextentryafterloops Next entry after loops OPTIONAL