THOMSON TG784-SIP - Wireless Mssid Ifconfig

wireless Commands
908
E-DOC-CTC-20080619-0007 v1.0
wireless mssid ifconfig
Configure a ssid context
SYNTAX:
wireless mssid ifconfig ssid_id = <number{0-4}>
[ssid = <string>]
[apisolation = <{disabled|enabled}>]
[any = <{disabled|enabled}>]
[secmode = <{disable|wep|wpa-psk}>]
[WEPkey = <quoted string>]
[WPAPSKkey = <quoted string>]
[WPAPSKversion = <{WPA|WPA2|WPA+WPA2}>]
[addscript = <quoted string>]
[delscript = <quoted string>]
[trace = <{disabled|enabled}>]
where:
ssid_id ssid id REQUIRED
ssid ssid OPTIONAL
apisolation ap isolation OPTIONAL
any public network OPTIONAL
secmode security mode OPTIONAL
WEPkey WEP key: expected format 5 or 13 ASCII
characters, or 10 or 26 HEX digits.
OPTIONAL
WPAPSKkey WPA-PSK key: expected format 8 to 63 ASCII
characters or 64 HEX digits.
OPTIONAL
WPAPSKversion wpa version OPTIONAL
addscript creation data interfaces OPTIONAL
delscript remove data interfaces OPTIONAL
trace security tracing OPTIONAL