systemlog Commands
E-DOC-CTC-20080619-0007 v1.0
749
systemlog send
Send messages to remote syslog server.
SYNTAX:
systemlog send [fac = <{kern|user|mail|daemon|auth|syslog|
lpr|news|uucp|cron|security|ftp|local6|
local7}>]
[sev = <{emerg|alert|crit|err|warning|notice|
info|debug}>]
[hist = <{disabled|enabled}>]
dest = <ip-address>
where:
fac Syslog facility level. OPTIONAL
sev Syslog severity level. OPTIONAL
hist Syslog display message history (over several
bootups)
OPTIONAL
dest Remote syslog server destination: an ip-address. REQUIRED
To Next Page
