atm Commands
E-DOC-CTC-20080619-0007 v1.0
43
atm debug traceconfig
Display/Modify AAL5 debug trace configuration.
SYNTAX:
atm debug traceconfig [len = <number>]
[intf = <{atm_Internet}>]
[state = <{disabled|enabled}>]
where:
len Maximum number of AAL5 payload bytes that
will be shown (0-2000, global setting).
OPTIONAL
intf The name of the ATM interface to configure. OPTIONAL
state Enable/disable AAL5 debug tracing. OPTIONAL
To Next Page
