pptp Commands
E-DOC-CTC-20080619-0007 v1.0
671
pptp ifadd
Adds a PPTP profile (backwards compatible with previous release, use profiles
SYNTAX:
pptp ifadd dest = <string>
[rate = <number{10-10000}>]
[encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]
where:
dest The WAN destination for this PPTP tunnel.
Typically a phonebook name.
REQUIRED
rate Transmit speed in kbits/s for the WAN link. OPTIONAL
encaps The WAN protocol encapsulation. OPTIONAL
ac Enable/disable sending address and control field
(0xFF03) on the WAN link.
OPTIONAL
To Next Page
