eth Commands
E-DOC-CTC-20080619-0007 v1.0
385
eth filter template ruleadd
Connect an operand rule with a filter.
SYNTAX:
eth filter template ruleadd filter = <{}>
operand = <{}>
[negate = <{disabled|enabled}>]
[order = <number{-100-100}>]
[operator = <{Ignore|AND|OR}>]
where:
filter The name of an filter. REQUIRED
operand The name of the operand to connect with. REQUIRED
negate negate or not the operand outcome. OPTIONAL
order The operand order in thes filter (lower order is
processed first = priority)
OPTIONAL
operator Operand operator. OPTIONAL
To Next Page
