P20
MAIN MENU
NOTE: When using the “HD Austria Senderliste” associated channels cannot be edited (delete, move,
rename). If you have made a recent or other channel search, TV or radio channels which are
not included in the “HD Austria Senderliste” are ranked above channel number 4000 or 6000
and can still be edited.
7.4.2 Radio Channels
This menu allows you to organise your radio channels like the TV channels. The only difference is that
there are two available favourite lists for radio channels. For the functions please refer to chapter 7.4.1 TV
Channels.
7.4.3 TV Programme Guide
The EPG (Electronic Programme Guide) is a very useful function that allows you to watch programme
schedules and information on screen and add events for recording. For detailed instruction and
information please refer to chapter 6.7 EPG (Electronic Programme Guide) as the functions in this menu
are identical.
7.4.4 HDD Manager
This menu allows you to watch previously recorded programmes, format your USB storage device and
more. On the left side you see the list of recorded events if you already have made some. Below you can
find information of your USB storage device and the selected recording. On the right side you see the
duration of the recording as well as the title. Directly above you have a preview of this recording. Press the
u button to show it or press OK to watch in full screen mode. Further the displayed buttons can be used
in preview mode as in full screen mode.
These further functions are available in this menu:
Delete a record
Use pq to select a file that you want to delete. Press the RED button to execute.
Format HDD
Press the GREEN button to format your connected USB storage device.
WARNING: The format function will delete all recordings, data and information from your USB device.
THOMSON will not take any responsibility for damaged or lost data on the USB device. Please
make a backup copy of important data on your USB device before using it with your receiver.
Remove USB
Press the YELLOW button to safely remove the USB storage device from your receiver.
NOTE: We recommend using this function especially for bigger sized HDDs.
Select Partition
Press the BLUE button to open the selection if you have more than one partition available on your USB
storage device. Use tu to select a partition and then select OK to change it. If you have more partitions
formatted in FAT 32 you can also record to them.
Renaming and sorting of recording(s)
Press MENU to open one of these functions, use pq to select Rename or + Sort and then press OK at the
preferred function. Press OK on the recording you want to rename. Enter the recording name with the 0~9
buttons. When you have entered the name use pq to select OK to change the name or Cancel to return.
If you have selected + Sort you can sort the recordings either by date or by alphabet. Press OK on the
preferred function in order to execute.
To Next Page
