P22
MAIN MENU
A selected file will be immediately shown in preview mode. Press OK to playback in fullscreen
mode.
For pictures the displayed options in the info banner vary depending on the selected repeat mode:
Press the RED Option button to adjust the functions for playback (in preview and fullscreen mode).
Use the BLUE Rotate button to turn the picture in another direction.
Use tu or 7 8 to navigate to the previous or next picture.
For pictures the following Options can be adjusted:
Slide Time: Use tu to adjust the display time of a picture. Available settings are 1 sec ~ 8 sec.
Slide effect: Use tu to adjust the transition style from one picture to the next. Available
settings are Normal, Shutter, Stretch, Zoom out, Insert, Mosaic or Transparency
overlay.
Repeat Mode
OFF The file will not be repeated
Once This option has no effect
All All files of a folder will be repeated. A symbol will be displayed accordingly.
Random The files of a folder will be repeated randomly. A symbol will be displayed
accordingly.
Press to quit or to leave this menu.
7.5 Timer
In this menu you can adjust the time and programme timers. These submenus are available: Time adjust
and Set Timer.
7.5.1 Time Adjust
This menu allows you to set the way the receiver collects and adjusts the time. You can also adjust the
Auto Standby function here. Use pq to highlight the setting you wish to change and tu or 0~9 to
change the value of the highlighted setting. Press OK for a list with all available options for the chosen
setting.
Auto Time Setting: Defines if the time is collected automatically via satellite, the default setting is ON.
Use tu to select OFF if you prefer to set up the time manually.
GMT Offset: When the Auto Time Setting is kept ON the receiver shows the current used offset.
In case Auto Time Setting is OFF you can adjust the offset between: +0:00 – -12:00
hours.
Summer time: If Auto Time Setting is OFF you can adjust the summer time here.
Current Date: If Auto Time Setting is OFF you can adjust the date here.
Current Time: If Auto Time Setting is OFF you can adjust the current time here.
Auto Standby: This function is a new power saving feature that helps reducing power
consumption. It switches the receiver to standby when no command has been
given from the remote control for at least the set time. Possible settings are: 1H-
12H and OFF to deactivate this function.
Standby after Timer setting: This function allows you to determine whether the receiver
should switch to standby after the end of the programmed
timer(s) On, or whether the receiver should remain switched on
Off.
NOTE: 5 min after switching the receiver to standby it enters the deep sleep mode. In this time the
receiver is able to start up quickly. Starting up from deep sleep takes approx. 1 min.
7.5.2 Set Timer
Timers can be used to schedule recordings or to switch to a certain channel at a specific time. It will help
you not to miss your favourite events. Above the settings you will see the current date and timer displayed.
To Next Page
Loading...
