THOMSON THT712 - Info Banner; Selection of Audio Language; Teletext; Subtitles

11
English
6.1.3 Using pq
p switches to the next channel.
q switches to the previous channel.
6.2 Info Banner
While watching TV, you can press INFO at any time to access information about the current
channel and event*. Press INFO twice for extended EPG details about the current channel. Press
INFO three times for EPG details of the next programme.
* Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select another audio
stream, press AUDIO in viewing mode. A list of available audio streams will now be displayed.
Use pq to select a stream and conrm with OK. The audio channel as stereo, mix, left and
right can be selected with t u.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press TEXT in viewing mode
and use the 0~9 buttons to enter the number of the page you wish to see. Use pq to select
one page up or down, use t u to select subpages. Press  or TEXT to get back to viewing
mode.
6.5 Subtitles
Some channels support a choice of subtitle languages. Press SUB in viewing mode to display
a list of available subtitle languages. Select your subtitle of choice with pq and press OK to
conrm. Press  to leave without making changes.*
* Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not present, then, they can
be activated via Teletext.
6.6 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view event
schedules and programme information and to mark events/movies for wakeup of the receiver.
To access the EPG, press EPG in viewing mode. Use pq to select a channel and t u to select
an event. Press OK to display detailed information of the selected event. Use 9 to quit the
detailed information screen. Press the RED or GREEN buttons to see and select another day.
Press the YELLOW button to set a timer for a selected event. Refer to section 7.3.6 for details of
the timer function.
NOTE: Availability of EPG data depends on broadcast.