17
English
listen or transfer Dolby® Digital/Dolby® Digital Plus* audio to the TV via
HDMI or to a home cinema set.
SPDIF Audio Output:
Toggles between PCM and Bitstream output. When PCM is selected, all
digital audio will be converted to stereo audio. Bitstream enables you
to listen or transfer Dolby® Digital/Dolby® audio to a home cinema set
through coaxial S/PDIF (not Dolby® Digital Plus).
Audio Description: AD. Set this option to On if you like to have support of an audio track that
describes the content on screen. Useful for the visual impaired.
Audio Description Volume oset:
Select the volume from the AD audio track.
* Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
7.3.3 General Settings
This menu allows you to manage the basic system settings of your receiver.
It consists of the following sub-menus: Auto Standby and Auto Channel Update.
7.3.3.1 Auto Standby
Auto Standby is a new feature that helps you reducing power consumption.
Press pq to highlight the menu Auto Standby and press OK advance.
When set to between 1 to 6 Hours, the receiver will switch to standby if it doesn’t receive any
commands of the remote control during this time. Set Auto Standby to O to deactivate the
automatic standby function. The default setting is 3 hours.
7.3.3.2 Auto Channel Update
When set to On, the unit will check automatically at the moment of turning to standby if new
channels are available. The next time when switching on, you will be informed if new channels
are on air and prompted to start an auto scan. This way you are always up-to-date with the
channel list. If you select O, the automatic channel update function is deactivated.
7.3.4 Parental Control
This menu allows you to protect the installation menu and/or channels with a PIN code. You can
also create a new PIN code. Use pq to select Parental Control from the Settings menu and
press OK to proceed. You will be asked to enter your PIN code. (DEFAULT PIN: 0000)
Menu Lock: Locks the installation menu. You can set the Menu Lock to On or O.
Program Lock: Switch all programme/channels lock to On or O. If the lock is set in the
TV or Radio Manager menu. You can select the lock separately for every
channel which you like to protect it with a PIN code.
Program Lock age: Choose between: O Lock None, Lock All, 4 years and up to 18 years.
Channels with a parental rating above the chosen age will be protected
with a PIN code (if available in your local broadcast.)
To Next Page
Loading...
