EasyManua.ls Logo

Thump ATV110CC - Protective Clothing; Essential Protective Gear; Refitting and Loading Warnings; Accessory Guidelines

Default Icon
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Protective Clothing
1. Protective wear such as helmet with protective mask, dustproof glasses, boots
and gloves should be worn during operation for sake of personal safety.
ALWAYS wear a helmet.
2. Loose clothes are not suitable for All Terrain Vehicle operation as they may get
caught on the operating lever, kick lever, footrest or wheel,
resulting tll personal injury.
3. e exhaust system becomes hot during operation, and it remains hot for a
while even aer stopping the engine, Be careful not to touch the exhaust system
while it is hot. Wear clothing that fully covers your legs.
REFITTING
Retting of the All Terrain Vehicle, or removal of original parts, may
make the vehicle unsafe or illegal. Obey all national and local equipment
regulations.
LOADING
e incorrect loading could hurt the performance and reliability.
Max load limit: 75kG
ACCESSORIES
Genuine accessories by our company have been specically designed
and tested on the all terrain vehicle. Because our company wont test
accessories manufactured by other companies, you are personally
responsible of selection, installation, and use of them. Always follow
the guidelines below:
1. Carefully inspect the accessory to make sure that it does not obscure any lights or
reflectors, reduce ground clearance, and banking angle, or limit suspension travel, steering
travel or control operation.
2. Accessories may increase the time that hands or feet operate controls, resulting in de-
creased reaction time in an emergency.
3. Do not add electrical equipment that will exceed the vehicles electrical system capacity
4. Do not add cooling device to the engine.