Need help?Do you have a question about the Thump ATV110CC and is the answer not in the manual?
General safety instructions before operation.
Explains notation meanings for manual clarity.
Defines levels of hazard and severity of consequences.
Illustrates key safety practices like wearing gear and avoiding roads.
Details consequences and limits for safe operation.
Warns against carrying passengers for safety reasons.
States age limit for operating the ATV to prevent injury.
Defines vehicle capacity and user limitations.
Specifies intended use and restrictions on public roads.
Emphasizes safety efforts required for ATV operation.
Advises parents on teaching children safe ATV handling.
Lists rules like no riders under 16, operator only, off-road use.
Covers alcohol, supervision, hot parts, and ventilation.
Details necessary wear like helmets, boots, and gloves for safety.
Advises against unauthorized modifications and incorrect loading.
Provides rules for selecting and installing accessories safely.
Specifies recommended fuel octane and engine oil type.
Explains operation of engine stop, brake, parking brake, and start switches.
Describes how the throttle lever controls engine speed.
Explains the choke lever's role in starting the engine.
Details how to open, close, and secure the fuel tank cap.
Lists safety measures to follow when refueling the ATV.
Explains the function and usage of the remote stop switch.
Highlights critical safety points for using the stop switch.
Details how the throttle limiter affects speed and safety.
Outlines essential steps for the initial engine break-in period.
Emphasizes the importance of the first service for longevity.
Lists critical items to check before each ride for safety.
Directs users to specific sections for riding and instruction.
Details the steps to safely start the ATV's engine.
Crucial safety warnings related to starting and running the engine.
Explains how to safely disengage the parking brake.
Advises on maintaining proper foot and hand placement for control.
Provides guidance on safe braking, avoiding turns, and slippery surfaces.
Explains how to turn the ATV due to its solid rear axle.
Details how to adjust turning technique for increased speed.
Offers methods to recover from front and rear wheel skids.
Discusses safe riding on hills and rollover risks.
Provides step-by-step instructions for safely ascending inclines.
Highlights dangers and critical steps when climbing hills.
Gives instructions for safely riding down a hill.
Offers guidance on navigating slopes safely to avoid tipping.
Provides instructions and cautions for crossing water.
Details how to properly stop the engine and park the vehicle.
Offers advice to parents on teaching children to ride safely.
Reiterates the importance of protective wear for riders.
Suggests how to familiarize a child with vehicle controls.
Describes how children can practice controls with the engine off.
Details practicing starting, stopping, and distance awareness with engine on.
Guides on teaching turning maneuvers with and without engine power.
Explains how to combine learned skills for overall riding proficiency.
Explains the importance of regular inspection and maintenance.
Warns about performing maintenance without qualification and keeping children away.
Provides a schedule for routine inspections and servicing.
Details the procedure for removing and reinstalling the seat.
Explains the function and cleaning of the air cleaner.
Guides on checking spark plug condition and replacement.
Explains how to adjust the engine's idle speed correctly.
Details the process for adjusting throttle cable play.
Provides steps for changing the engine oil.
Highlights importance of brake inspection and maintenance.
Explains how to adjust the parking brake for secure locking.
Covers checking brake fluid level and friction pad wear.
Details the procedure for adjusting the recoil starter mechanism.
Discusses tire safety, pressure, wear, and size impact.
Guides on checking tire pressure and proper replacement.
Explains methods for repairing tire punctures.
Details what to check for on the drive chain and sprockets.
Provides steps for cleaning and lubricating the drive chain.
Outlines the procedure for removing and reinstalling wheels.
Identifies potential causes for starting issues.
Lists steps to diagnose fuel system related starting problems.
Guides on testing the ignition system for spark.
Lists checks for common causes of engine stalling.
Details checks for low/unstable idle and poor performance.
Covers checks for spark and engine compression problems.
Outlines steps to diagnose fuel delivery and air filter issues.
Details checks for carburetor jets and valve timing.
Steps for preparing the ATV before washing it.
Caution against using high-pressure washers on the ATV.
Instructions on how to wash the ATV using low-pressure methods.
Details checks after washing, including brake performance.
Outlines steps for preparing the ATV for extended storage.
Emphasizes planning and preparation for safe riding.
Lists recommended items to carry for rides.
Provides instructions for safely transporting the ATV.
Discusses what supplies to carry while riding on trails.
Offers tips for owners to be environmentally conscious.
Provides basic steps for dealing with unexpected issues.
Troubleshooting guide for engine starting and performance issues.
Details methods for temporary tire repair and associated risks.
Advises on actions to take after a crash or component failure.
Explains how to find VIN, Engine Number, Model No., etc.
Details engine type, rating, gearbox, starter, etc.
Lists specifications for suspension, brakes, and wheels.
Provides physical dimensions and weight information.
Lists parts for the handlebar assembly.
Lists parts for the steering column assembly.
Lists parts for the front bumper and armrests.
Lists parts related to the ATV's frame.
Lists parts for foot pedals and nets.
Lists parts for the oil tank assembly.
Lists parts for the rear flat fork assembly.
Lists parts for the rear shock absorber.
Lists parts for the rear axle assembly.
Lists parts related to the seat.
Lists parts for the muffler assembly.
Lists parts for the induction system.
Lists parts for the braking system.
Lists parts related to the plastic body covers.
Lists various electrical components and their part numbers.
Lists various decorative and informational stickers.
Guides on how to find and order parts online.
Outlines the terms and limitations of the product warranty.
Details the process for filing a warranty claim.
Warns about risks and recommends safety equipment.
Defines intended use and age recommendations for riders.
States purchaser's duties and legal acceptance of terms.
Provides a section to record vehicle service history.
General safety instructions before operation.
Explains notation meanings for manual clarity.
Defines levels of hazard and severity of consequences.
Illustrates key safety practices like wearing gear and avoiding roads.
Details consequences and limits for safe operation.
Warns against carrying passengers for safety reasons.
States age limit for operating the ATV to prevent injury.
Defines vehicle capacity and user limitations.
Specifies intended use and restrictions on public roads.
Emphasizes safety efforts required for ATV operation.
Advises parents on teaching children safe ATV handling.
Lists rules like no riders under 16, operator only, off-road use.
Covers alcohol, supervision, hot parts, and ventilation.
Details necessary wear like helmets, boots, and gloves for safety.
Advises against unauthorized modifications and incorrect loading.
Provides rules for selecting and installing accessories safely.
Specifies recommended fuel octane and engine oil type.
Explains operation of engine stop, brake, parking brake, and start switches.
Describes how the throttle lever controls engine speed.
Explains the choke lever's role in starting the engine.
Details how to open, close, and secure the fuel tank cap.
Lists safety measures to follow when refueling the ATV.
Explains the function and usage of the remote stop switch.
Highlights critical safety points for using the stop switch.
Details how the throttle limiter affects speed and safety.
Outlines essential steps for the initial engine break-in period.
Emphasizes the importance of the first service for longevity.
Lists critical items to check before each ride for safety.
Directs users to specific sections for riding and instruction.
Details the steps to safely start the ATV's engine.
Crucial safety warnings related to starting and running the engine.
Explains how to safely disengage the parking brake.
Advises on maintaining proper foot and hand placement for control.
Provides guidance on safe braking, avoiding turns, and slippery surfaces.
Explains how to turn the ATV due to its solid rear axle.
Details how to adjust turning technique for increased speed.
Offers methods to recover from front and rear wheel skids.
Discusses safe riding on hills and rollover risks.
Provides step-by-step instructions for safely ascending inclines.
Highlights dangers and critical steps when climbing hills.
Gives instructions for safely riding down a hill.
Offers guidance on navigating slopes safely to avoid tipping.
Provides instructions and cautions for crossing water.
Details how to properly stop the engine and park the vehicle.
Offers advice to parents on teaching children to ride safely.
Reiterates the importance of protective wear for riders.
Suggests how to familiarize a child with vehicle controls.
Describes how children can practice controls with the engine off.
Details practicing starting, stopping, and distance awareness with engine on.
Guides on teaching turning maneuvers with and without engine power.
Explains how to combine learned skills for overall riding proficiency.
Explains the importance of regular inspection and maintenance.
Warns about performing maintenance without qualification and keeping children away.
Provides a schedule for routine inspections and servicing.
Details the procedure for removing and reinstalling the seat.
Explains the function and cleaning of the air cleaner.
Guides on checking spark plug condition and replacement.
Explains how to adjust the engine's idle speed correctly.
Details the process for adjusting throttle cable play.
Provides steps for changing the engine oil.
Highlights importance of brake inspection and maintenance.
Explains how to adjust the parking brake for secure locking.
Covers checking brake fluid level and friction pad wear.
Details the procedure for adjusting the recoil starter mechanism.
Discusses tire safety, pressure, wear, and size impact.
Guides on checking tire pressure and proper replacement.
Explains methods for repairing tire punctures.
Details what to check for on the drive chain and sprockets.
Provides steps for cleaning and lubricating the drive chain.
Outlines the procedure for removing and reinstalling wheels.
Identifies potential causes for starting issues.
Lists steps to diagnose fuel system related starting problems.
Guides on testing the ignition system for spark.
Lists checks for common causes of engine stalling.
Details checks for low/unstable idle and poor performance.
Covers checks for spark and engine compression problems.
Outlines steps to diagnose fuel delivery and air filter issues.
Details checks for carburetor jets and valve timing.
Steps for preparing the ATV before washing it.
Caution against using high-pressure washers on the ATV.
Instructions on how to wash the ATV using low-pressure methods.
Details checks after washing, including brake performance.
Outlines steps for preparing the ATV for extended storage.
Emphasizes planning and preparation for safe riding.
Lists recommended items to carry for rides.
Provides instructions for safely transporting the ATV.
Discusses what supplies to carry while riding on trails.
Offers tips for owners to be environmentally conscious.
Provides basic steps for dealing with unexpected issues.
Troubleshooting guide for engine starting and performance issues.
Details methods for temporary tire repair and associated risks.
Advises on actions to take after a crash or component failure.
Explains how to find VIN, Engine Number, Model No., etc.
Details engine type, rating, gearbox, starter, etc.
Lists specifications for suspension, brakes, and wheels.
Provides physical dimensions and weight information.
Lists parts for the handlebar assembly.
Lists parts for the steering column assembly.
Lists parts for the front bumper and armrests.
Lists parts related to the ATV's frame.
Lists parts for foot pedals and nets.
Lists parts for the oil tank assembly.
Lists parts for the rear flat fork assembly.
Lists parts for the rear shock absorber.
Lists parts for the rear axle assembly.
Lists parts related to the seat.
Lists parts for the muffler assembly.
Lists parts for the induction system.
Lists parts for the braking system.
Lists parts related to the plastic body covers.
Lists various electrical components and their part numbers.
Lists various decorative and informational stickers.
Guides on how to find and order parts online.
Outlines the terms and limitations of the product warranty.
Details the process for filing a warranty claim.
Warns about risks and recommends safety equipment.
Defines intended use and age recommendations for riders.
States purchaser's duties and legal acceptance of terms.
Provides a section to record vehicle service history.
General| Brand | Thump |
|---|---|
| Model | ATV110CC |
| Category | Offroad Vehicle |
| Language | English |
To Next Page