16
Equipment and Adjustments
Drive chain Adequate lubrication
General condition Bolts and nuts are tight
No rattle from any part of the machine with
the engine running
No visible evidence of damage
Remote engine stop
switch (if used )
Proper operation
No damage to rubber cap
Secure attachment of lanyard to cap
RIDING TIPS
Finish reading this “Riding Tips “ section and then the “Instructing and
Young Rider “ section before starting the ATV or beginning riding instruc-
tion. is “riding Tips “ section contains important operating information
you will need to know before you go to the “Instructing the Young Rider “
section will guide you in teaching young riders how to operate and ride the
ATV using information you learn in this owner’s manual.
STARING THE ENGINE
Before attempting to start the engine, make sure:
1. e parking brake is engaged.
2. e engine stop switch is in the “ RUN “ position.
3. Verify that the remote engine stop switch cap is in place.
When the engine is cold:
1. Push down the choke lever as for as it Will go.
To Next Page
Loading...