48
Storage Procedure
If your ATV is to be le unused for an extended period of time, it needs
special servicing requiring appropriate materials, equipment, and skill. For
this reason, Company recommends that you trust this maintenance work
to your dealer. If you wish to service the machine for a storage yourself,
follow the general guidelines below:
VEHICLE
Place the vehicle on level ground and thoroughly clean the entire vehicle.
FUEL
Drain the fuel from the fuel tank using a commercially available hand
pump or siphon. Drain the fuel from the carburetor using the carburetor
drain screw
Do not allow the fuel to spill; catch the fuel in a suitable container. Do
not allow fuel to come in contact with the hot engine or exhaust system.
Extinguish smoking materials before draining any fuel and stay away from
any other re or heat source. Keep pets and children away from fuel. and
dispose of unwanted fuel properly.
ENGINE
Pour on tablespoon of motor oil into spark plug hole, Reinstall the spark
plug and crank the engine a few times.
TIRES
inflate tires to normal specifications.
EXTERNAL
Spray all vinyl and rubber parts with rubber preservative.
Spray unpainted surfaces with rust preventative.
Coat painted surfaces with car wax.
To Next Page
Loading...