Thunder Laser NOVA-51 - Speed Key; Max;Min Power Keys

THUNDER LASER NOVA-51
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com No.197, Hudong Road, Shatian Town,
Tel :(86)769 826653 Dongguan, Guangdong, China
43
4.6.3 Speed Key
Push the “Speed” key when the screen is on the main interface, it will show as below:
Speed：
mm/s
Modified press Enter
300
Push the “X+/-“ Keys to move the cursor in the numeral area, and push the “Y+/-” keys to
change the value, then push the “Enter” key to save the change, push the “Esc” key to
invalidate the change.
4.6.4 Max/Min Power Keys
Push the “Max Power” or the “Min Power” keys when the screen is on the main interface, it
will show as below:
%
Modified press Enter
%
MaxPower1:
MaxPower2:
30.0
30.0
Press Z/U move item
%
Modified press Enter
%
MinPower1:
MinPower2:
30.0
30.0
Press Z/U move item
When “Z/U” key is pushed, the green block can move up and down to denote the
changing item, then “Y+/-” keys and “X+/-” keys can be used to change the value.