THUNDER LASER NOVA-51
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com No.197, Hudong Road, Shatian Town,
Tel :(86)769 826653 Dongguan, Guangdong, China
1.1 Technical Data / Device Specification
Mechanics
Working area 51.2“x 35.4“/ 1300 x 900 mm
Table Size 55.1“x 40.6“/ 1400 x 1030 mm
Z Axis Height 9.1 inch / 230 mm
Max. Height of work piece (Motorized Table, Standard laser head) 9.1 inch / 230 mm
Max. Height of work piece (No Motorize Table, Standard Laser head) 1-2.1 inch /27- 55mm
Max. Engraving speed 39 inch/sec. / 1000 mm/sec. Standard
Cutting speed depending on material, thickness, laser power
Motor Easy Servo Motor
Drive Hybrid Servo Drive
Work piece table Solid metal (Honey comb table)
Max. load of work piece table 30 kg
Net Weight 230kgs (507Ibs)
Lenses available (focal distance) 2, 0”
Focus lens diameter 20mm
Reflector diameter 25mm
Beam combiner diameter 25mm
Dimensions
W x D x H 74.8“x 55.3“x 40.9“/ 1900 x 1405 mm x 1040 mm
Max Part Size (W x L x H)
Front Door Closed 55.1“x 40.6“x 10.6“/ 1400 x 1030 mm x 230 mm
Pass-Through Door 55.1“ x∞“x 1.2“/ 1400 x∞mm x 20 mm
Features
Standard:
Red Dot Pointer, Auto Focus, Motorized Table, Pass-Through Door, Air Assist, Water
Pump, Exhaust Fan, Honey Comb Table, 2,0”(50.8mm)Focus Lens, Easily Adjustable
Home Position, LCD Display, 3D Engraving, “No Water “protection, Emergency Stop,
Maintenance mode, Open cover protection, TL-Timer, The warning light.
Optional:
Rotary Attachment, Water Chiller Attachment, High Resolution head (up to 1000DPI, while
standard laser head Max is 500DPI), High air compressor set (Includes water filter).
Control System
Laser power Adjustable from 2 - 70% (typically 12-70%)
Interface Hardware USB: connect to PC and U-disk
Ethernet: connect to PC
Interface Software RDWorksV8
Operating Modes Optimized raster, vector, and combined mode
Buffer Memory 128 MB Standards
To Next Page
Loading...